gdr_09
04-19 10:54 PM
How did it get approved? Did u transfer u'r H1B to another company, after it gets denied?
Please share u'r experience.
Please share u'r experience.
wallpaper rafael nadal for armani
simple1
02-15 11:37 AM
I have the same query:
Permit: using EAD and calling AC21
Role: exactly the same.
Salary: large difference (bayarea vs small city in under developed state) due to the prevailing wage at the new location is far lower.
Experts please advice.
Permit: using EAD and calling AC21
Role: exactly the same.
Salary: large difference (bayarea vs small city in under developed state) due to the prevailing wage at the new location is far lower.
Experts please advice.
mk58581
06-06 05:47 PM
Hi
Thank u for the response
client is a finacial firm UBS.
Consulting firm is a direct vendor to the client and they transferred my H1 offerrin' me FT
This was the offer they pay $x on a daily basis -- W2
$65k -- they will mention in H1 and the remaining amount as per the W2 they will pay as bonus once every 3 months, tht's wht the agreetment is.
In the contract i was mentioning it says in case i fail to provide services to the vendor i am suposed to pay all the expenses they spent on me but the thing is client rejected the offer and there was no job @ all and they stopped floating my resume, askin' me to find a job myself.
This is the email i received.... but the thing is i never started at all bcoz of clients rejection based on credit report.
You and vendor entered into an agreement on or about March 8th 2010. According to the agreement you were to provide your services to Vendor by working on a project for our client UBS. Your services were to commence on March 22, 2010
To date, you have not fulfilled your obligations nder the agreement and thus youare required to pay Vendor the total sum of amounts for obtaining your work authorisation along with the cost of obtainig your background check.
If i am still not clear please let me knw
Thanks Again
Rgds
Kumar
Thank u for the response
client is a finacial firm UBS.
Consulting firm is a direct vendor to the client and they transferred my H1 offerrin' me FT
This was the offer they pay $x on a daily basis -- W2
$65k -- they will mention in H1 and the remaining amount as per the W2 they will pay as bonus once every 3 months, tht's wht the agreetment is.
In the contract i was mentioning it says in case i fail to provide services to the vendor i am suposed to pay all the expenses they spent on me but the thing is client rejected the offer and there was no job @ all and they stopped floating my resume, askin' me to find a job myself.
This is the email i received.... but the thing is i never started at all bcoz of clients rejection based on credit report.
You and vendor entered into an agreement on or about March 8th 2010. According to the agreement you were to provide your services to Vendor by working on a project for our client UBS. Your services were to commence on March 22, 2010
To date, you have not fulfilled your obligations nder the agreement and thus youare required to pay Vendor the total sum of amounts for obtaining your work authorisation along with the cost of obtainig your background check.
If i am still not clear please let me knw
Thanks Again
Rgds
Kumar
2011 Rafael Nadal, Emporio Armani
ak_manu
04-09 03:27 PM
Hi,
My current EAD will expire in September 2008. It is applied through Company A. I want to change my employer in July to Company B. But I would think during
that time frame I would have already applied for my EAD renewal.
Can I transfer to Company B during this renewal process?
Thanks
AK
My current EAD will expire in September 2008. It is applied through Company A. I want to change my employer in July to Company B. But I would think during
that time frame I would have already applied for my EAD renewal.
Can I transfer to Company B during this renewal process?
Thanks
AK
more...
Becks
02-23 09:45 PM
I think once the application is processed, they will mark the case as "pending visa number availability". July 30 means, they must have processed(hopefully) half of the July fiasco filers. We can expect LUDs on the cases.
If PD is not current, will USCIS process your I-485 application?
NSC indicates that they are processing I-485 applications with notice date of July 30, 3007. Does it mean they have processed all the I-485 applications received (ND) prior to that date even if PD was not current for all those applications?
If PD is not current, will USCIS process your I-485 application?
NSC indicates that they are processing I-485 applications with notice date of July 30, 3007. Does it mean they have processed all the I-485 applications received (ND) prior to that date even if PD was not current for all those applications?
mps
06-04 11:26 AM
I had used 6 months of previous bank statement (original) and had mentioned the same in the letter written to consulate officer.
Using that my parents did get 10 year multiple entry visa.
Using that my parents did get 10 year multiple entry visa.
more...
pappu
03-01 08:02 PM
Its been a long time since a conf call is organized. Could you all pls. organize the call and start action items. Thanks
2010 nadal crotch armani
kumara121
04-08 05:05 PM
USCIS demand sheet shows 17000 GC inventory until 2006. When the EB1 spillover to EB2 is 12000, don't understand how the dates moved less than 2 months. It looks like USCIS is very confused and making us all confused.
only good thing here is some movement is much much better than nothing.
only good thing here is some movement is much much better than nothing.
more...
alterego
04-11 04:59 PM
I would definitely be cautious about the plan you have mentioned. Here is the reason. You applied as an attending/practicing hospitalist through labor for a future job offer and you are moving into a trainee position. Should you be called for an interview or get a RFE at the AOS stage(not that uncommon nowadays), you would have to demonstrate how it is that doing an oncology fellowship better qualifies you to be a future hospitalist. That would be difficult. You could take a chance and get away but know that you will be taking one.
Even in cases of Physician NIW when you have completed the stipulated 5 yr commitment, lawyers are unwilling to give the all clear to do a fellowship on the EAD. They seem to be in consensus that you can move into another attending internist job but that is as far as they will go.
Even in cases of Physician NIW when you have completed the stipulated 5 yr commitment, lawyers are unwilling to give the all clear to do a fellowship on the EAD. They seem to be in consensus that you can move into another attending internist job but that is as far as they will go.
hair Rafael Nadal Armani Jeans
rockstart
05-19 03:40 PM
Its not 40,000 labor or 140's dude every GC is minimum 2 (applicant + spouse) in some cases if you add children then it can consume 3-4 visa's from the quota and that is what is making the line even more longer.
If I assume that every year EB3-India gets 5000 GC-Visa. From 2001 - 2008 Total = 40,000 EB3-India Visas
Is number of applications in 2001 and 2002 is > 40,000.
Its very hard to believe.
If I assume that every year EB3-India gets 5000 GC-Visa. From 2001 - 2008 Total = 40,000 EB3-India Visas
Is number of applications in 2001 and 2002 is > 40,000.
Its very hard to believe.
more...
ash27
03-31 10:35 PM
I've read multiple posts but it is not clear if an EAD recipient can do contract work on W2.
My situation is that I work for a desi consulting co. and currently doing corp to corp with TekSystems. TekSystems is OK to employ me as a W-2. However, it is contract based employment. Could Gurus please advice if an EAD recipient can work on W-2 with vendors like TekSystems.
My situation is that I work for a desi consulting co. and currently doing corp to corp with TekSystems. TekSystems is OK to employ me as a W-2. However, it is contract based employment. Could Gurus please advice if an EAD recipient can work on W-2 with vendors like TekSystems.
hot Rafael Nadal and Armani.
serg
04-06 11:18 PM
that's the official title of the bill, nothing wrong with it.
they still have a cloture motion vote tomorrow morning, so we'll see.
Yes, sure, I'm not going to give up until it will be clear. By the way, they will have almost a night to make some agreements (sure, they don't want to be "last mile" in this bill, both of them). Hope they will bring out something new tomorrow morning :)
they still have a cloture motion vote tomorrow morning, so we'll see.
Yes, sure, I'm not going to give up until it will be clear. By the way, they will have almost a night to make some agreements (sure, they don't want to be "last mile" in this bill, both of them). Hope they will bring out something new tomorrow morning :)
more...
house Rafael+nadal+armani+ad
GCNirvana007
04-08 06:04 PM
Please feel free to delete my id.
I am done here. Wish good luck to everybody. Hope everyone gets GC soon.
I am done here. Wish good luck to everybody. Hope everyone gets GC soon.
tattoo Rafa+nadal+armani+2011
lecter
March 15th, 2004, 05:18 PM
Steven brings up a good point about those camera phones. I fear them to a degree. Someone told me recently that they had read/heard advice that when you're using a credit card at a store make sure you keep the numbers covered up. Apparently, people with camera phones have been known to take a picture of your card to get the numbers and expiration date.
Gary
gee they'd want to be close.
Gary
gee they'd want to be close.
more...
pictures nadal for emporio armani
msingh
06-12 09:06 AM
Hi,
While in the process of filing for labor certification my company has found 2 suitable citizens who are eligible for the job.
Now what are my options going forward and how does this affect my chances of a successful PERM filing ??
I'm filing in EB3 category right now. Also I need to file for labor before oct since my H1 will expire its original 6 year length next Oct (Oct 2010).
While in the process of filing for labor certification my company has found 2 suitable citizens who are eligible for the job.
Now what are my options going forward and how does this affect my chances of a successful PERM filing ??
I'm filing in EB3 category right now. Also I need to file for labor before oct since my H1 will expire its original 6 year length next Oct (Oct 2010).
dresses Rafael Nadal - More Armani
srikanthmavurapu
08-16 03:53 PM
Srikanth,
It all depends on the language in the Agreement that you signed. More over in some state doesn't consider these kind of agreements.
Tell him that you are going to complain to DOL if he threatens you. Even though he sues you, as the reason behind your H1 transfer is not getting paid in time, there are very good chances getting final verdict in your favor.
So don't worry.
Thanks for the advice. I also told him that i will complain to DOL and USCIS but no response from him he asked for compensation but i didn't agreed on it . Now, I am in process of complaining to DOL and they are saying that the case is in court so now i am searching for a lawyer in virginia.
Thanks,
Srikanth
It all depends on the language in the Agreement that you signed. More over in some state doesn't consider these kind of agreements.
Tell him that you are going to complain to DOL if he threatens you. Even though he sues you, as the reason behind your H1 transfer is not getting paid in time, there are very good chances getting final verdict in your favor.
So don't worry.
Thanks for the advice. I also told him that i will complain to DOL and USCIS but no response from him he asked for compensation but i didn't agreed on it . Now, I am in process of complaining to DOL and they are saying that the case is in court so now i am searching for a lawyer in virginia.
Thanks,
Srikanth
more...
makeup Rafel Nadal for Armani Jeans:
romeshtrisal
10-19 11:06 AM
EB-2, NSC, PD 10/30/07. Only LUD on 11/22/06, since then nothing
girlfriend Rafa Nadal para Armani
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
hairstyles 2010 Armani+nadal+underwear nadal for armani. Nadal for Armani Jeans
swadeshi
08-31 12:30 AM
OK so we're 1 million in the backlog. That could be a small country.
Instead of spending hundreds of thousands on lobbying, we can just buy a piece of land somewhere (big enough to have a passport office building), get immediate citizenship in our new country and then USCIS will be able to process our GC applications within a year.
Someone from Taiwan (and smaller neighboring countries) can get GC in 1 year but if you're from China you will wait 6-10 years. I am not sure of how much cultural differences exist between these two countries, all I know is that my Taiwanese friend speaks Chinese, goes to Chinese church. So much for diversity.
So.. if anyone has the info on how to register a new country, I'd like to know.
Sorry, its the wee hours and I just felt like posting this. Please close thread as and when desired.
Is it your wishful thinking bloke? if it was possible our chinni bhai would have done that instead of waiting this long...
Instead of spending hundreds of thousands on lobbying, we can just buy a piece of land somewhere (big enough to have a passport office building), get immediate citizenship in our new country and then USCIS will be able to process our GC applications within a year.
Someone from Taiwan (and smaller neighboring countries) can get GC in 1 year but if you're from China you will wait 6-10 years. I am not sure of how much cultural differences exist between these two countries, all I know is that my Taiwanese friend speaks Chinese, goes to Chinese church. So much for diversity.
So.. if anyone has the info on how to register a new country, I'd like to know.
Sorry, its the wee hours and I just felt like posting this. Please close thread as and when desired.
Is it your wishful thinking bloke? if it was possible our chinni bhai would have done that instead of waiting this long...
SivaMayam
07-17 07:35 PM
Dear Nachi,
I was listening to Rajiv's recent/previous conference call recordins(mp3 foramat can be found on main page) in which he said some of his clients were in similar situations and did not have any issues.
http://www.immigration.com/improving_immigration/conference_calls.html
Please listen to one of those(recent 2 recordings) you will get some answer. Also consult with your lawyer if you filed through an attorney. Keep all the papers ready just in case you need to refile...
Good luck
~S
I was listening to Rajiv's recent/previous conference call recordins(mp3 foramat can be found on main page) in which he said some of his clients were in similar situations and did not have any issues.
http://www.immigration.com/improving_immigration/conference_calls.html
Please listen to one of those(recent 2 recordings) you will get some answer. Also consult with your lawyer if you filed through an attorney. Keep all the papers ready just in case you need to refile...
Good luck
~S
newtoh1
12-02 04:50 PM
I have a question..
Applying labor before 365 days of H1 expiry is enough
or
Approval of labor before 365 days of H1 expiry is required
for getting extension of 1 year on H1 visa ?
Applying labor before 365 days of H1 expiry is enough
or
Approval of labor before 365 days of H1 expiry is required
for getting extension of 1 year on H1 visa ?
No comments:
Post a Comment